DELL GX270 LAN CARD DRIVER

Grasp the card by its top corners, and ease it out of its connector. To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover. Your Dell computer uses only PCI slots. To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer. Do not route card cables over or behind the cards. If the card is full-length, insert the end of the card into the card guide bracket as you lower the card toward its connector on the system board.

Uploader: Akinorr
Date Added: 12 April 2005
File Size: 38.55 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 53135
Price: Free* [*Free Regsitration Required]

Do not route card cables over or behind the cards. The brackets also keep dust and dirt out of your computer. Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the car. Grasp the card by its top corners, and ease it out of its connector. If you are installing or replacing a card, follow the procedures in the next section.

Your Dell computer uses only PCI slots. Installing filler brackets over empty card-slot openings is cadd to maintain FCC certification of the computer.

Related Drivers  CREATIVE SB0240 AUDIGY 2 PLATINUM SOUND CARD DRIVER

Download drivers for Dell Computer Corporation OptiPlex GX270

See the documentation that came with the card for information on configuring the card, making internal llan, or otherwise customizing it for your computer.

If the card is full-length, insert the end of the card into the card guide bracket as you lower the card toward its connector on the system board.

ISA cards are not supported. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components. To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.

Before you care any of the procedures in this section, follow the steps in ” Safety Instructions. After you open and close the cover, the chassis intrusion detector, if enabled, causes the following message to appear on the screen at the next computer start-up:.

Insert the card firmly into the card connector on the system board. To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer’s electronic components. If you need a filler bracket, contact Dell.

To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack. You can do so by touching an unpainted metal surface on the computer chassis.

Related Drivers  CANON 2525 IMAGERUNNER DRIVER DOWNLOAD

If a setup password has been assigned by delll else, contact your network administrator for information on resetting the chassis intrusion detector. To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

If necessary, disconnect any cables connected to the card. Some network adapters automatically start the computer when they are connected to a network. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment.

Download driver for Dell Computer Corporation OptiPlex GX

To guard against electrical acrd, be sure to unplug your computer from its electrical outlet before installing any cards. To connect a network cable, first plug the cable into the network wall jack, and then plug it into the computer. See the documentation for the card for information about the card’s cable connections.