To install a hard drive larger than gigabytes on your computer you need Windows Service Pack 3 or later or Windows XP Service Pack 1 or later. A Performance as compared to single hard drive performance B Assumes all hard drives are of the same capacity. Thanks TIA for any input. It’s a dark brown or black color. Attach the other cable end B to the drive. However, these speeds are relevant only to hard drives. Attach a cable end to the connector A on the board.
|Date Added:||20 May 2011|
|File Size:||36.54 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Any Advice?? – Intel DPERL – 2 SATA drives – Cannot establish RAID 0 | PC Review
From this page http: Optical drives generally top out at about 22 MBps for reads and Fast read Non-optimized write. Go to the Boot menu.
Combined capacity of all hard drives. Fast read Slightly degraded write. It’s a dark brown or black color.
Downloads for Intel® Desktop Board D865PERL
Freddy, Nov 2, After that, you can post your question and our members will e865perl you out. Switching modes may cause an “NTLDR” error, an immediate blue screen error followed by a reboot, or other boot failure. Thanks TIA for any input. F6 Driver Disk Note: SATA 2 Raid question. Select the Advanced menu, then the Drive Configuration menu. Glad to hear you solved your problem.
Are your driver and BIOS updated. See Intel page http: If drives are not the same capacity, then the size will equal that of the smaller drive.
Attach the other cable end B to the drive. Attaching the Serial ATA cable. I have no problem if drives are separate and not in RAID config. It allows up to 3.
Jim Macklin, Nov 7, Combined capacity of all hard drives minus 1. Fast read Fast write. Thanks for all the information, I’ve read it. But, when I try to boot-up, it says: Either end of the cable can be connected to the SATA drive or the connector on the board.
See the section titled ‘Create Volume Saata for additional information.
Enabling RAID in the BIOS for Intel® Desktop Boards
Should something happen to szta RAID volume, the operating system should not be impacted. I’m going through the same thing with two WD Raptor hard drives. Attach a cable end to the connector A d865pefl the board. What color is your motherboard? Read Me pdf OS: There should have been some procedure or order to install the RAID 0 array.
Some Serial ATA drives may require a power adapter cable. Release Notes pdf OS: